When I wrote about a DIY ESP32-S3 internet radio last week, "raspbeguy" commented he'd rather choose an ESP32-based DIY DAB+ ...

lv_obj_set_flex_flow(parent, LV_FLEX_FLOW_COLUMN); lv_obj_set_flex_align(parent, LV_FLEX_ALIGN_START, LV_FLEX_ALIGN_CENTER, LV_FLEX_ALIGN_CENTER); lv_obj_t * obj; obj ...

This DIY 6-DOF robot arm project details a two-year build cycle using 3D printed parts, custom electronics, and over 5,000 ...

In this video I'm walking you through the steps I took to make a standalone version of my pellet level monitoring sensor that is not directly connected to Home Assistant but it functions separately .

Is it something in the water, or have there been a lot of really cool servo projects lately? Mechaduino is a board that sits on a regular stepper motor and turns it into a servo with a closed loop ...

Keeping track of your 3D-printer filament use can be both eye-opening and depressing. Knowing exactly how much material goes into a project can help you make build-versus-buy decisions, but it can ...

Differential drive ROS 2 robot using Raspberry Pi + Arduino motor controller + serial ros2_control hardware interface. Device: /dev/i2c-1 (I2C bus 1 — GPIO2=SDA pin3, GPIO3=SCL pin5) Address: 0x28 ...

Abstract: Owing to the limitations of hyperspectral optical imaging, hyperspectral images (HSIs) have a dilemma between spectral and spatial resolutions. The hyperspectral and multispectral image (HSI ...